DIY pump
A DIY sump pump had been installed in efforts to help the flooding crawl space and get the standing water out.
Mold on the joist
The conditions of this crawl space are ideal for mold growth on the floor joist. Mold will eat the organic material and weaken the structure creating wood rot and sagging floors.
Insulated blocks
Insulation and plastic ran the wall of the crawlspace in attempt to keep water out and insulate under the home. Unfortunately, this insulation is not designed for this and the plastic used was not able to keep the water out so the insulation was soaking up water as well. Wet insulation is very heavy and gravity will pull it from the wall.
Drainage Matting
A special dimpled DeltaDrainage Matting is installed before the liner allowing for ground water to travel below without creating pools or pockets of water under the liner.
Columns are wrapped
Even support columns are wrapped with the plastic vapor barrier liner.
Sump Pump for water management
A new TripleSafe Sump Pump is installed to collect and pump water out of the crawl space. A battery back up provides security for any power outages during storms.
Clean Crawl Space
Floor lined with 20Mil thick vapor barrier, support beam, and SmartJacks in place this looks like a whole new crawl space.
Healthy Conditions
These healthy conditions will be noticed under the home and through out the living space of the home. A SandiDry Sedona Dehumidifier sits in the background controlling the humidity of this crawl space. Healthy air, healthy wood, healthy air above.
Clean and Dry
The crawl space is clean and humidity controlled. Perfect for the HVAC unit, storage, flooring above, or storage.
Foam insulation
Spray foam in leaky joist areas will keep uncomfortable temperatures out.