Basement Waterproofing Photo Album: Basement Waterproofing in Hendersonville, TN

This customer called Frontier for their basement waterproofing needs. For this project, we used a DryTrak Two-Stage Waterproofing System, TripleSpace sump pump, downspout extensions, an IceGuard system, and to finish the project off a LawnScape system. With these products installed his basement water intrusion issues are solved and he now has a dry basement!

Basement Before Project

This is the beginning of the project, our foreman is just starting to excavate the area where the sump pump will go.

Drainage Lines

Extra drainage lines are placed in the basement flooring.

Drainage Lines Covered

The drainage lines are cemented in place.

Sump Pump Installation

Sump pump installation process. After the hole is dug out, the pump is placed inside and then assembled.

Sump Pump Install Finished

The TripleSafe sump pump is fully installed, and the excavation area is cemented over. A trench drain has also been installed in the doorway. The are used in high traffic areas to prevent water from coming in.

DryTrak Drainage System

As a baseboard drainage system, DryTrak® installs above the floor and along the inside perimeter of the basement. If you have a monolithic foundation, meaning that your floor and footing were poured as one piece, this is the only drainage system that's appropriate.

IceGuard System

If your discharge line is frozen with ice, the water will have no exit, thus backing up into your basement or crawlspace and burning out your pump. You will be flooded. To ensure that a basement does not flood from this freezing discharge lines, the water needs another way out of your home.