Basement Waterproofing Photo Album: Basement Waterproofing in Hendersonville, TN

This customer in Hendersonville, TN called Frontier for their basement waterproofing needs. To waterproof their basement we installed a WaterGuard sub-floor drainage system after drilling weeping holes in the concrete block walls, we also added a TrenchDrain for the entrance. We added a TripleSafe sump pump to pump water through the drainage lines. We also installed IceGuard to prevent floods from clogged or frozen discharge lines. These products will greatly reduce the chance of water intrusion issues.

Before Project Begins

Signs of water pooling and gathering with it dirt on the bottom of the basement floor.

Water Intrusion

You can see the water is seeping through the concrete block in this photo. Not only are the water lines visible but mildew and mold is starting to grow.

Old Sump Pump

This is the old sump pump, which was obviously not up to the task in pumping water out in this basement.

Cleaning Up

Cleaning up after the trench is dug and gravel has been added, before the final installation of the drainage system.

Preparing for WaterGuard

The trench is dug, weeping holes are drilled, and gravel has been added. The WaterGuard will soon be placed on top and sealed into place.

Installing the Sump Pump

A hole is dug out at the lowest point in the basement and the sump pump is being installed. The outer shell is inserted first, and the rest of the components assembled inside of it.

WaterGuard

WaterGuard being placed in position.

WaterGuard Installation Complete

The WaterGuard has been placed in position and a thin layer of cement is added over it.

TripleSafe Sump Pump

The TripleSafe sump pump is now fully assembled and installed. This will pump any water out through the connected drainage lines out of the basement.

IceGuard and LawnScape

The IceGuard and LawnScape systems have been installed and lines buried, This is where all the water that is pumped out of the basement will flow to. Far away from the structure.